117 10/02 general-purpose grade applications uninterruptible power supplies frequency converters professional power supplies features compact, i.e. high cu product high reliability and ripple current capability all-welded construction ensures reliable electrical contact version with optimized construction for base cooling (2-pad solution) available version with low-induct ance design available self-extinguishing electrolyt construction charge-discharge proof, polar aluminum case with insulating sleeve poles with screw terminal connections mounting with ring clips, clamps or threaded stud the bases of types with threaded stud and d 76,9 mm are not insulated, types with d = 91 mm have fully insulated bases kal0567-b b43455 b43457 b43455 capacitors with screw terminals b43457 standard ? 85 c b43455, b43457
118 10/02 standard ? 85 c b43455 / b43457 specifications and characteristics in brief ripple current capability due to the ripple current capability of the cont act elements, the following current upper limits must not be exceeded: rated voltage u r surge voltage u s 350 ? 450 vdc 1,10 u r (for u r 350 vdc) rated capacitance c r capacitance tolerance 470 ? 12 000 f 20 % m leakage current i l (5 min, 20 c) self-inductance esl approx. 20 nh capacitors with low-inductance design: d 64,3 mm: approx. 13 nh useful life 85 c; u r ; i ~ r 40 c; u r ; 1,5 i ~ r > 10 000 h > 200 000 h requirements: ? c / c 30 % of initial value esr 3 times initial specified limit i l initial specified limit failure percentage: 1 % failure rate: 40 fit ( 40 10 ?9 /h) (for definiton ?fit?, refer to chapter ?quality? , page 62) voltage endurance test 85 c; u r 2 000 h post test requirements: ? c / c 10 % of initial value esr 1,3 times initial specified limit i l initial specified limit vibration resistance to iec 60068-2-6, test fc: displacement amplitude 0,75 mm, frequency range 10 to 55 hz, acceleration max. 10 g , duration 3 2 h iec climatic category to iec 60068-1: 25/085/56 (? 25 c/+ 85 c/56 days damp heat test) detail specifications sectional specification similar to cecc 30301-803, cecc 30301-807 iec 60384-4 capacitor diameter 51,6 mm 64,3 mm 76,9 mm 91,0 mm i ~ max 30 a 40 a 50 a 70 a i l 0,3 a c r f ------- u r v ------- ? ?? ?? ? 0,7 4 a +
119 10/02 standard ? 85 c b43455 / b43457 dimensional drawings type b43455 type b43457 ring clip/clamp mounting threaded stud mounting positive pole marking: + the base of types with threaded stud and d = 91 mm is fully insulated (the lengths l and l 1 are in- creased by 0,5 mm in these cases). for types with threaded stud and d 76 mm the base is not insulated. also refer to the notes on mounting given on page 168. screw terminals with unf th reads are ava ilable upon request. dimensions and weights dimensions are also valid for 2-pad solution and low-inductance design. packing for ecological reasons t he packing is pure cardboard. te r - minal dimensions (mm) with insulating sleeve approx. wt. (g) di 1 i 1 1 i 2 + 0 l 3 d 1 d 2 max d 3 max a + 0,2 ? 1 ? 0,4 m 5 m 5 51,6 +0/?0,8 51,6 +0/?0,8 80,7 105,7 87,2 112,2 17 17 7,0 +0,2/? 1 7,0 +0,2/? 1 m 12 m 12 8,2 8,2 13,5 13,5 22,2 22,2 220 280 m 5 64,3 +0/?0,8 105,7 112,2 17 7,0 +0,2/? 1 m 12 8,2 13,5 28,5 440 m 6 m 6 m 6 76,9 +0/?0,7 76,9 +0/?0,7 76,9 +0/?0,7 105,7 143,2 220,7 111,5 149,0 226,5 17 17 17 6,4 +1,1/? 0,8 6,4 +1,1/? 0,8 6,4 +1,1/? 0,8 m 12 m 12 m 12 17,7 17,7 17,7 17,7 17,7 17,7 31,7 31,7 31,7 540 840 1300 m 6 m 6 m 6 m 6 91,0 +0/?2 91,0 +0/?2 91,0 +0/?2 91,0 +0/?2 97,0 144,5 191,0 221,0 103,3 149,8 196,3 226,3 17 17 17 17 6,4 +1,1/? 0,8 6,4 +1,1/? 0,8 6,4 +1,1/? 0,8 6,4 +1,1/? 0,8 m 12 m 12 m 12 m 12 17,7 17,7 17,7 17,7 17,7 17,7 17,7 17,7 31,7 31,7 31,7 31,7 750 1200 1700 1900 capacitor diameter d packing units (pieces) capacitor diameter d packing units (pieces) 51,6 mm 64,3 mm 22 15 76,9 mm 91,0 mm 12 8 m5: min. reach of screw = 8 mm m6: min. reach of screw = 12 mm*) *) 8 mm for low-inductance design
120 10/02 standard ? 85 c b43455 / b43457 special designs low-inductance design 2-pad solution design for optimized connection of the capacit or to the heatsink when using base cooling. this version is available for capacitors without threaded stud and for diameters 64,3 mm (cf. i ~ r (b) in table ?technical data and or dering codes? and useful life graphs). ordering codes: accessories the following items are included in the delivery package, but are not fastened to the capacitors: the following must be ordered separately: ring clips b44030 (cf. page 169) clamps for capacitors with d 64,3 mm b44030 (cf. page 173) insulating parts b44020 (cf. page 166) design identification in 3rd block of ordering code remark low inductance (13 nh) m003 fo r capacitors with diameter d 64,3 mm 2-pad solution m006 for capacitors with diameter d 64,3 mm and without threaded stud thread toothed washers screws/nuts maximum torque for terminals m 5 a 5,1 din 6797 cylinder-head screw m 5 8 din 84-4.8 2 nm m 6 a 6,4 din 6797 cylinder-head screw m 6 12 din 85-4.8 2,5 nm for mounting m 12 j 12,5 din 6797 hex nut bm 12 din 439 10 nm heatsink thermopad thickness 0,2 mm 0,5 mm kal0823-3-e
121 10/02 standard ? 85 c b43455 / b43457 overview of available types the capacitance and voltage ratings listed above ar e available in different cases upon request. other voltage and capacitance ratings are also available upon request. u r (vdc) 350 400 450 c r ( f) case dimensions d l (mm) 470 51,6 80,7 1 000 51,6 80,7 51,6 80,7 51,6 80,7 1 500 51,6 105,7 51,6 105,7 64,3 105,7 2 200 51,6 105,7 64,3 105,7 64,3 105,7 3 300 64,3 105,7 76,9 105,7 76,9 143,2 4 700 76,9 105,7 76,9 143,2 91,0 97,0 76,9 220,7 91,0 144,5 6 000 76,9 143,2 76,9 220,7 76,9 220,7 6 800 76,9 143,2 91,0 144,5 8 200 91,0 144,5 91,0 221,0 10 000 91,0 144,5 91,0 191,0 12 000 91,0 191,0 91,0 221,0
122 10/02 standard ? 85 c b43455 / b43457 technical data and ordering codes u r vdc c r 100 hz 20 c f case dimensions d l mm esr max 100 hz 20 c m z max 10 khz 20 c m i ~ max 100 hz 40 c a i ~ max 100 hz 85 c a i ~ r 100 hz 85 c a i ~ r (b) 100 hz 85 c a ordering code 1) 350 1 000 51,6 80,7 129 140 13 5,4 4,5 7,8 b4345*a4108m000 1 500 51,6 105,7 93 110 16 7,0 5,8 9,2 b4345*a4158m000 2 200 51,6 105,7 72 63 20 8,5 7,1 13 b4345*b4228m000 3 300 64,3 105,7 48 43 23 9,8 8,2 14 b4345*b4338m000 2) 4 700 76,9 105,7 38 35 28 12 10 19 b4345*b4478m000 2) 6 000 76,9 143,2 32 30 32 14 12 19 b4345*a4608m000 2) 6 800 76,9 143,2 27 27 36 16 13 22 b4345*a4688m000 2) 8 200 91,0 144,5 23 23 42 18 15 26 b4345*a4828m000 2) 10 000 91,0 144,5 20 22 48 21 17 31 b4345*b4109m000 2) 12 000 91,0 191,0 17 21 54 23 20 30 b4345*a4129m000 2) 400 1 000 51,6 80,7 129 140 13 5,2 4,8 8,9 b4345*a0108m000 1 500 51,6 105,7 93 110 17 6,8 6,2 11 b4345*a9158m000 2 200 64,3 105,7 72 63 21 8,4 7,6 13 b4345*a0228m000 2) 3 300 76,9 105,7 54 48 23 8,5 8,5 16 b4345*a0338m000 2) 4 700 76,9 143,2 41 37 29 11 11 17 b4345*a0478m000 2) 4 700 91,0 97,0 41 37 30 13 11 23 b4345*k0478m000 2) 6 000 76,9 220,7 32 30 35 15 13 17 b4345*a0608m000 2) 6 800 91,0 144,5 38 35 39 17 14 24 b4345*a0688m000 2) 10 000 91,0 191,0 26 26 50 22 18 28 b4345*a0109m000 2) 12 000 91,0 221,0 22 22 58 25 21 31 b4345*a0129m000 2) 450 470 51,6 80,7 390 420 7,0 3,1 2,6 4,1 b4345*a5477m000 1 000 51,6 80,7 180 200 12 5,1 4,2 8,6 b4345*b5108m000 1 500 64,3 105,7 120 130 16 6,9 5,8 9,4 b4345*a5158m000 2) 2 200 64,3 105,7 81 70 18 7,9 6,6 12 b4345*b5228m000 2) 3 300 76,9 143,2 54 48 25 11 9,1 14 b4345*a5338m000 2) 4 700 76,9 220,7 42 39 31 14 11 15 b4345*a5478m000 2) 4 700 91,0 144,5 42 39 31 14 11 19 b4345*j5478m000 2) 6 000 76,9 220,7 33 31 38 17 14 19 b4345*a5608m000 2) 8 200 91,0 221,0 24 24 48 21 18 25 b4345*a5828m000 2) 1) * ?5? = for capacitors with ring clip/clamp mounting ?7? = for capacitors with threaded stud 2) for 2-pad solution (types withoud threaded stud) and for low-inductance design, see page 120.
123 10/02 standard ? 85 c b43455 / b43457 useful life depending on ambient temperature t a (for natural cooling) and vers us temperature of case base t b (for base cooling) under rippl e current operating conditions 1) frequency factor of permissible ripple current i ~ versus frequency f 8 000 h 10 000 h 25 000 h 50 000 h 100 000 h 250 000 h 0 40 50 60 70 80 90 ab ; ?c tt 100 3,0 2,0 1,5 1,0 0,5 b43455/457 kal0526-9 (b) r ~ ? ; ~ ~ ? ~ r 1) the ripple current refers to i ~ r for natural cooling or to i ~ r (b) for base cooling, respectively. refer to page 40 for an explanation on how to interpret the useful life graphs. kal0394-v 0,8 f 0,9 1,0 1,1 1,2 1,3 1,5 10 2 2 10 3 5hz a b c 5 b43455/457 100 hz f ~ ~ d (mm) 51,6 64,3 76,9 91,0 curvecbac
124 10/02 standard ? 85 c b43455 / b43457 frequency characteristics of esr typical behavior impedance z versus frequency f typical behavior at 20 c kal0395-4 0,5 10 2 f 1,0 1,5 10 3 2 hz a b c 100 hz f esr esr 55 0,9 0,8 0,7 0,6 1,2 1,1 b43455/457 kal0405-f z 10 10 1 f 10 2 10 3 10 4 10 5 10 6 10 7 hz 10 0 10 1 10 2 10 3 ? 1500 f/250 v 4 4 4 4 6800 f/160 v b43455/457 2 _ 10 1 _ d (mm) 51,6 64,3 76,9 91,0 curvecbaa
1 herausgegeben von epcos ag unternehmenskommunikation, postfach 80 17 09, 81617 mnchen, deutschland ++49 89 636 09, fax (0 89) 636-2 26 89 ? epcos ag 2002. vervielf?ltigung, ver?ffentlichung, verbreitung und verwertung dieser broschre und ihres inhalts ohne ausdrckliche genehmigung der epcos ag nicht gestattet. bestellungen unterliegen den vom zvei em pfohlenen allgemeinen lieferbedingungen fr erzeug- nisse und leistungen der elektroindustrie, soweit nichts anderes vereinbart wird. diese broschre ersetzt die vorige ausgabe. fragen ber technik, preise und lieferm?glichkeiten richten sie bitte an den ihnen n?chstgele- genen vertrieb der epcos ag oder an unsere vert riebsgesellschaften im ausland. bauelemente k?nnen aufgrund technischer erfordernisse gefahr stoffe enthalten. ausknfte darber bitten wir unter angabe des betreffenden typs ebenfalls ber die zust?ndige vertriebsgesellschaft einzu- holen. published by epcos ag corporate communications, p.o. box 80 17 09, 81617 munich, germany ++49 89 636 09, fax (0 89) 636-2 26 89 ? epcos ag 2002. reproduction, publication and dissemination of this brochure and the informa- tion contained therein without epcos? prior express cons ent is prohibited. purchase orders are subject to t he general conditions for the supply of products and services of the electrical and electronics industry recommended by the zvei (german electrical and electronic manufacturers? association), unless otherwise agreed. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may c ontain dangerous substances. for information on the type in question please also contact one of our sales offices.
|
